4-Drum Low-Profile Ultra-Spill Pallet P4 Plus (No Drain) – UltraTech 9630

The UltraTech 9630 is a low-profile polyethylene sump with deck surface (Ultra-Spill Pallet P4 Plus) without a drain designed to store and provide containment for up to four 55-gallon drums. In the event of a container failure, liquids would be captured in the sump, helping prevent contamination to the surrounding environment. The low 8-3/4″ profile positions drum funnels below eye level – significantly reduces the potential for hazardous fluids to splash into the eyes or face and is nearly 50% lower than standard spill pallets making drum handling safer and less strenuous. The Ultra-Spill Pallet P4 Plus helps you comply with containment regulations while storing steel and poly drums. Capture leaks, drips and spills to keep floors dry and workers safe.

Key benefits:

• 9,000 lb. weight capacity — strong enough to support 4 fully loaded 55-gallon plastic drums of liquid
• Low 8 3/4″ profile positions drum funnels below eye level – significantly reduces the potential for hazardous fluids to splash into the eyes or face
• Nearly 50% lower than standard spill pallets, drum handling is safer and less strenuous
• Low-density polyethylene (LDPE) construction resists UV rays, rust, corrosion and most chemicals for long, trouble-free life
• Large sump capacities meet SPCC and EPA Container Storage Regulation 40 CFR 264.175 Spill Containment Regulations
• Removable textured grating enhances traction to minimize costly slips and to help prevent drums from sliding; lifts out to provide unrestricted sump access for hassle-free cleaning
• 4-way forklift pockets — makes pallet easy to move, even fully loaded
• Translucent sidewalls permit easy visual inspection
• 75-gallon sump capacity
• Can also be used with IBC Containment Units
• Sump Composition: Linear, low-density polyethylene with UV inhibitors
• Grate Composition: Injection-molded polyethylene foam
• Deck surface dimensions : 52″ L x 52″ W
• Style: Heavy-duty

40 CFR 264.175 – Hazardous waste containment systems must be free of structural cracks or gaps, be designed to keep spilled liquids from remaining in contact with the container, prevent run-on and “have sufficient capacity to contain 10% of the volume of the containers, or the volume of the largest container, whichever is greater.”