Key benefits:
- Natural/green color
- Fits most standard 15-, 30- and 55-gallon steel and plastic drums with a 2″ IPS adaptor
- 5 gpm (18.9 lpm) maximum output
- Not for use with solvents
Material:
High density polyethylene (HDPE ) is the most commonly used resin. This economical plastic has good impact and chemical resistance, is naturally translucent and flexible. It is typically used for personal care products such as shampoo bottles. Adding color will give HDPE an opaque look that will result in an increase in weight and rigidness. We have a variety of these rigid and tough high density polyethylene products in stock, from containers, pails, bottles, caps, tubs and jugs. HDPE works well in below freezing temperatures. HDPE heat compatibility varies. Maximum fill temperature is generally around 145°F; however, testing is recommended with your specific product and application.Disclaimer:
This information has been provided as a general guide. It is the customer’s responsibility to select the proper container for product and application compatibility.
Additional Information
| Color | Mixed |
|---|---|
| Material | HDPE |
| Dimensions | 41″ L x 2.75″ W x 43.25″H |
| Case Pack | 25 ea. |
| Case Dimensions | 44.5″ L x 20.75″ W x 20.75″ H |
| Pallet Pack | 4,250 ea. (170 cases) |
| Pallet Dimensions | 40″ L x 48″ W x 90″ H |
| Weight | 0.63 lbs. |
| Country of Manufacture | United States |
| Flow Rate | 5 gpm |
| Neck Width | 2″ |
| Note: | Please note some pumps may have a turret cap while others may have a twist off cap. *It is up to the customer/end user to determine the compatibility of the pump and the product being dispensed. |














Reviews
There are no reviews yet.