UltraTech 8209 – 6′ X 6′ Spill Containment Berm, Stake Wall Model

The Stake Wall Model’s design features flexible polyurethane stakes that allow the sidewalls to spring into place automatically -even after being bent in either direction. This makes it perfect for spill sites or containment areas, because it allows drums and trucks to roll over the walls without breaking their upright structure.

Key benefits:

• Stake Wall Model Containment Berms feature a unique design which allows the sidewalls to collapse in either direction and spring back automatically to their upright position
• Meets SPCC and EPA Container Storage Regulation 40 CFR 264.175.
• Standard material of construction is Copolymer 2000™.

Sidewalls:

• Vertical sidewall supports located every 12′. Each Support features a built-in “living hinge’ at its base, which allows sidewalls to collapse in either direction.
• Collapsed sidewalls spring back automatically.

Compliance:

• EPA 40 CFR 264.175 Containment of Containers Containing Free Liquid.
• SPCC – Spill Prevention, Control and Countermeasure Act

Chemical Compatibility – Copolymer 2000™, Urethane and XR-5
According to EPA guidelines, spills must be cleaned up within 24 hours and any secondary containment areas must be inspected once a week. The chart below lists chemical compatibility of Copolymer 2000, Urethane and XR5. The information has been developed from industry available data and offers compatibility based on exposure of one week or less.

UltraTech’s Chemical Compatibility Guide